Description
|
TOPGNSS GNSS Module GN-801 Performance |
|
|
GNSS CHIP |
UBX-M8030-KT |
|
frequency |
L1, 1575.42MHz |
|
protocol |
NMEA 0183 v2.3,4.x GPS/QZSS L1 C/A,GLONASS L10F Bei Dou B1 SBAS L1 C/A:WASS,
EGNOS,MSAS , Support Galileo E1B/C. Default GPS+GLONASS mode |
|
Available baud rate |
(Default 9600) Can be set 1200,4800,19200,38400,57600,115200 bps |
|
Receiving channel |
72 |
|
Sensitivity |
Tracking sensitivity:-160Dbm Capture sensitivity:-157dBm |
|
Cold start |
29s average |
|
Warm start time |
28s average |
|
Hot start time |
1s average |
|
Precision |
HorizontalPosition:Autonomous<2.5maverage, SBAS < 2.0m average |
|
maximum height |
18000 Meter |
|
Maximum speed |
515 m/s |
|
Maximum acceleration |
4G |
|
Update frequency |
1-10Hz(default1HZ |
|
A-GPS |
AssistNow on-line and off-line |
|
Working output level |
|
|
output level |
Output TTL level |
|
Physical characteristics |
|
|
PIN |
6 pin 1.0 pitch GND,VCC3.3-5V.TX.RX.PPS.EN |
|
Dimensions |
30mm * 30 mm * 8.5mm |
|
Operating Voltage |
3.3V-5.0VDC ±5% |
|
weight |
8.5g |
|
Connector form |
1.0 6 PIN |
|
Cable length: |
15 CM |
|
Operating temperature |
-40 to 85 |
|
Storage temperature |
-40 to 85 |
GN-801 PIN function description
|
NMEA |
Description |
|
GND |
GND |
|
VCC |
Main power supply of the system, the power supply voltage is +3.3V~+5V, and the current consumption is about 55 mA during operation. |
|
TXDA |
UART/TTL |
|
RXDA |
UART/TTL |
|
PPS |
Time standard pulse output |
|
EN |
Power enable, high level / floating module working, low level module off |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.